Description
*** SAFETY GUIDELINES ***
Because of the absence of locks in this build, it is key that you understand how to properly operate and de-prime the blaster to avoid injury. The primary rule of thumb/finger is to never grab the handle when the priming lever is in its opened position. Manuals and documents will be introduced in the official release. We are not responsible for any harm you inflict to yourself or others with this blaster.
Note, this is for the hardware kit only, you will need to print and assembled the 3d printed parts of the blaster on your own.
Product Description:
The Wrenfield is a bolt-action blaster that features ejecting shells, detachable magazines, and ambidextrous options. Co-designed with Heath Heil, this is currently the most powerful and competitive blaster we have available.
Base order comes with the following:
– QTY 1 Open Beta hardware kit
Additional Specs & Information:
This blaster shoots upwards of 200fps stock and uses a 7-10 round detachable magazine that can be removed with a button-styled magazine release. In the event of a shell jam, the blaster can be cleared easily by removing the magazine and cycling its action; conventional dart jams are nearly impossible with this style of blaster. The blaster’s dominant hand operation can also be easily swapped with just a screwdriver, from Right handed operation to Left-handed operation. As an added bonus, all Wrenfield blasters will come with an adjustable stock. which greatly improves the ease of priming.
Additional Specs
Approximately 36″ in length from collapsed stock to end of barrel. Stock extends by about 1.5″.
*** File Access ***
For file access, you must fill out this google form: https://forms.gle/Wd1H8JnjEPLbZJmo7
Once approved, you will be directed to further instructions. While my email is the preferred method of contact, you may also message me on facebook as sometimes my email filters out messages as spam.
Reviews
There are no reviews yet.